To Wind the Bobbin

To Wind the Bobbin --

1. Loosen stop-motion screw with right hand while holding hand wheel with left hand.

2. Place empty bobbin on bobbin-winder spindle.

3. Press bobbin winder down against motor belt.

4. Place spool of thread on spool pin.

5. Thread machine and bobbin as shown above.

6. Hold thread end and start machine. (End of thread will break off after a few coils have been wound on bobbin.)

7. When bobbin is full, stop machine.

.

8. Cut thread.

9. Lift bobbin winder away from belt and remove bobbin

10. Tighten stop-motion screw.

If Thread Does Not Wind Evenly on Bobbin --

1. Loosen screw that holds bobbin-winding thread guide (reverse "S" ) on bed of machine.

2. Move thread guide to left if thread winds high on right of bobbin.

3. Move thread guide to right if thread winds high on left of bobbin.

4. Tighten thread guide screw.